ISG/ISW pipeline pump centrifugal pump set

Product Overview:
The ISG/ISW pipeline centrifugal pump is also a single-stage single suction centrifugal pump, also known as a vertical centrifugal pump due to its vertical structure design. This type of centrifugal pump is designed according to industry standards for performance and size, and is a new energy-saving product. It will replace the IS type horizontal single-stage pipeline centrifugal pump. This series of pipeline centrifugal pumps is suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation, to transport clean water and liquids with similar properties to water. The temperature does not exceed 80C, and if it exceeds 80C, hot water pipeline centrifugal pumps or high-temperature resistant pipeline centrifugal pumps can be selected
Product features:
·The pipeline centrifugal pump is a vertical structure with the same inlet and outlet diameters and located on the same horizontal line. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, small footprint, and low building investment. If a protective cover is added, it can be used outdoors
·The impeller is directly installed on the long shaft of the motor, with a short axial size and a compact structure. The pipeline centrifugal pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the vertical centrifugal pump, with low vibration and noise
·The vertical single-stage centrifugal pump shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant sealing, which can effectively extend the service life of mechanical seals
·The vertical single-stage centrifugal pump is easy to install and maintain, without the need to dismantle the pipeline system. As long as the pump coupling seat nut is removed, all rotor components can be extracted
·This series of pipeline centrifugal pumps can be operated in series or parallel according to the requirements of flow rate and head
·According to the requirements of pipeline layout, pumps can be installed vertically and horizontally
Working conditions and performance parameter range:
Flow rate: 3-600m/h
Head: 5m~150m
Power: 0.75KW~160KW
Caliber: DN25~150mm
Speed: 2900r/min~1450r/min
Material: Ball mill pump body, stainless steel impeller, stainless steel shaft Product Usage:
Used for transporting clean water and other liquids with physical and chemical properties similar to clean water, suitable for industrial and urban water supply and drainage, pressurized water supply in high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration circulation, bathroom and other cold and warm water circulation pressurization and equipment matching
Technical parameters: